5
(1)

In the previous article, we mentioned a lot of knowledge about bollards. So, in today’s guide, we will educate you on the top twenty bollard manufacturers in 2023. After reading this article, you can make a choice based on your actual situation. Read on to learn more.

1. What are bollards?

Bollards, also known as car stops, are a type of bay that is defined as a “fence or barrier in the roadway.” They are usually shaped like cylindrical columns and installed perpendicular to the ground. Bollards are usually installed at intersections, crosswalk connections, or intersection openings to prevent casualties. Install bollards to prevent vehicles from driving onto the sidewalk in the unlikely event that they do.

Bollard

2. Types of bollards

There are two common types of bollards:

1) N-type impact guardrail

N-type bollards are accessories that cannot prevent vehicle collisions. They are used to stop vehicles from entering the road. They are also used to separate pedestrian and vehicular traffic through openings in intersections. The purpose of pedestrian and bicycle fences is to maintain pedestrian traffic, whereas the purpose of N-shaped bollards is to prevent pedestrians from crossing the street.

2) H-type impact bollard

H-type bollards are used as impact-resistant bollards to resist vehicle collisions. They are used to prevent vehicle entry. They are also used to delineate openings similar to N-shaped bollards. Similar to H-shaped bollards, vehicle guardrails are usually installed first. However, when a series of vehicle guardrails cannot be installed, H-shaped bollards can be installed to supplement the vehicle guardrails.

H-type impact bollard

3. Bollard installation standards

The installation of bollards is divided into N-type bollards and H-type bollards. Explain one by one below.

1) N-type bollard

N-type bollards are installed when vehicle speeds are low and pedestrian traffic is required. It is basically used in areas where the road width is narrow, roads can be visually distinguished, and pedestrian safety can be ensured.

The height of N-type bollards must be less than 0.85m to ensure that vehicles can see pedestrians and not hinder pedestrians’ sight when checking safety.

2) H-shaped bollard

H-type bollards are installed on roads with high pedestrian danger, high-speed vehicles, or poor visibility. For safety reasons, consideration should be given to installing them, especially when there are many users waiting on pedestrian streets.

H-shaped bollards must be between 2 and 3 feet tall so that vehicles can see pedestrians and pedestrians do not block their view when checking for safety. In this case, H-shaped bollards must be installed taking into account the height of the vehicle’s bumper.

For example, regardless of vehicle type, the bumper height of a passenger car is approximately 1.5 feet, while the bumper height of a truck is approximately 2 feet for an 8-ton truck and 2.25 feet for a 25-ton truck. Freight truck.

In addition, there are two types of H-type bollards, HC type, and HB type, because they are types that resist vehicle collisions.

3) HC type

When the HC type is installed, the vehicle mass is 1.8 tons, the collision speed is more than 20m/h, and the angle of entering the sidewalk is 15 degrees.

4) HB level

When the HB type is installed, the vehicle mass is 1.8 tons, the collision speed is more than 25m/h, and the angle of entering the sidewalk is 15 degrees.

Bollard installation standards

4. Location of bollards

Pillars are generally installed taking into account road and traffic conditions and past traffic accidents. The needs for bollards in each region are different. In addition to the above factors, it is also necessary to consider the needs of the region and the results of the safety inspection to make a comprehensive decision. Especially when installing H-shaped bollards, the distance between the bollards must be less than 1.5 meters to prevent vehicles from slipping past.

However, because sidewalks are used by a variety of people, consideration must be given to ensuring that many people can use the sidewalk comfortably. In addition to ordinary pedestrians, intended users include those using wheelchairs, walking sticks, and bicycles. Width must be approximately 3 feet or more when wheelchair access is expected.

If a cane is used to create a walkway, it must be approximately 4 feet wide. Additionally, in areas with snowfall, the width must be at least 3 feet. In addition, in areas with accumulated snow, consideration must be given to not interfering with snow removal operations and preventing pedestrians from being injured if they fall.

5. Top 20 bollard manufacturers

Below is a list of 20 bollard manufacturers.

1) Eaton

Eaton’s representative product is Mariner Lighting Bollard, a company listed on the New York Stock Exchange. Eaton Corporation was founded in 1911 and is headquartered in Dublin, Ireland. Eaton is a global power management company that provides electrical components, industrial components, power distribution and assemblies, and industrial applications. The company’s automotive division also supplies transmissions, hybrid systems, and fuel vapor components to the automotive industry. The company’s e-Mobility segment products include voltage inverters, power distribution systems, and commercial vehicle hybrid systems. In addition to providing engineering services, the company also provides maintenance services.

Eaton

2) Reliance Foundry Co. Ltd.

The main product of Reliance Foundry Co. Ltd. is bollards. Reliance Foundry Co. Ltd is a premier manufacturer of custom and stock cast metal products. Founded in 1925 in the United States. The company is a long-established supplier of outdoor venue furniture, bicycle storage systems, hardscape products, and traffic management supplies. Reliance also leverages its rich history to provide excellence in steel wheel manufacturing as well as exceptional custom casting services. Reliance Foundry builds on a long tradition of metal casting expertise to become an award-winning supplier serving high-profile, day-to-day needs across North America.

Reliance Foundry Co. Ltd. logo

3) Aotons

Founded in 2017, Aotons is a professional safety barrier supplier in China, which has independent research and development and obtained national patents.

In the past 6 years, Aotons has developed 3 series of patented safety guardrails, including parking guardrails, industrial guardrails, and automatic bollards. Their flexible safety barrier solutions have served industries such as petroleum, logistics, automobile manufacturing, chemicals and pharmaceuticals, food and beverages… You can find products at Budweiser, Nestlé, Watsons, EMS, Mazda, BYD Auto, Geely Automobile, Mengniu Diary, Yili, EMS, Shell, Midea, Haier, China Tobacco, SF Express, AAK, PPG, China Eastern Airlines, M&G, etc.

As of 2023, safety guardrails are not only selling well in the domestic market, but also exported to more than 30 countries and regions including Chile, France, Sweden, Mexico, Malaysia, New Zealand, Brazil, Colombia, Peru, Australia, and South Africa.

Aotons

4) AIDA ENGINEERING CO. LTD.

Founded on August 17th, 1974, AIDA ENGINEERING CO., LTD. manufactures and supplies various automated special-purpose machines based in Okayama, Japan.

The company’s product range includes tool-change-free cold bending forming machine BURS21, thin tube rolling lines (FTL), forming rolls, special machines, and self-service car/bike parking control systems. These products are used in manufacturing processes, infrastructure projects, and transportation solutions. They serve industries such as machine manufacturing, transportation, infrastructure development, and electronics. In addition to product offerings, the company provides after-sales support, on-site installation, design services, and trial testing.

5) Uniqscan

Shenzhen Uniqscan Technology Co., Ltd. is a professional security scanning equipment manufacturer specializing in the development and research of X-ray imaging technology, metal detection technology, explosive detection, liquid detection, traffic bollards, and related security services. They strictly follow the ISO9001 quality standard requirements from production research and development, manufacturing, and marketing to after-sales service, and have established a complete quality management and assurance system. We also take effective marketing management measures to control product quality, work efficiency, and service attitude to ensure that all customers receive Uniqscan’s highest quality products and best services.

Uniqscan logo

6) Hörmann

Hörmann is a leading European door supplier, but it also produces bollards. The globally active Hörmann Group is headquartered in Steinhagen, East Westphalia, near Bielefeld, Germany. The family-owned company, now run by the third and fourth generations, recently achieved an annual turnover of more than €1 billion.

Hörmann logo

7) PANELS

Panelchok is a leader in the manufacturing and marketing of constructive solutions for the food industry, operating in more than 40 countries in Europe, America, and Africa. Their products include PCK protection columns, PCK double-layer anti-collision railings, stop gates, and more. In recent years, their pursuit of continuous innovation has led to tremendous technological developments in our products and a number of world patents.

Panelchok logo

8) Quiko Italy SRL

Quiko Italy SRL is an Italian manufacturer and distributor of entrance access control automation systems, founded in 1968 in Sorsano, Vicenza. The company’s product range includes sliding doors, underground doors, and swing door operating systems. It also offers automated barriers and bollards for access control applications, as well as a variety of accessories for combination products. The company’s products are commonly used in residential, commercial, and industrial applications. As well as providing services to the transportation, security, and defense industries, it also provides consultancy services.

Quiko Italy SRL logo

9) TrafficGuard, Inc.

TrafficGuard, Inc. is a leading manufacturer and supplier of crash bollards and safety bollards for multiple industries, and they have been the leader in the manually operated bollard industry in the United States since 1999. All TrafficGuard, Inc. products are made of steel and feature heavy-duty construction. TrafficGuard, Inc. protects facilities, property, and personnel from unwanted vehicle intrusion with the use of removable, foldable, or permanent bollards. Their products can be used to restrict emergency access, protect access points to facilities, and many other applications.

TrafficGuard, Inc. manufactures and supplies a variety of different models of bollards, including collapsible bollards, fixed (recessed or surface mounted), parking bollards (collapsible or removable), and removable bollards (locking or non-locking ). No matter what level of security your application or location requires, you’ll be able to find the ideal bollard solution.

TrafficGuard, Inc. logo

10) FAAC (UK) Ltd,

FAAC TECHNOLOGIES is one of the top international companies in the field of access automation, parking, and access control in the residential and industrial sectors. The executive headquarters, the technical and administrative center of FAAC, are located in Bologna, Italy, but the group has a huge presence. Most of its operations are carried out abroad, including production sites and commercial premises. With consolidated sales of more than 600 million euros and 53 companies present on 5 continents, FAAC has more than 3,600 employees worldwide.

FAAC and certification go hand in hand. First, FAAC’s quality management system is certified to UNI EN ISO 9001:2015. TÜV certified. Related FAAC products are produced according to EN 16005 standards and are safe for automatic door systems. Since 1965, an ongoing commitment to component and product quality, careful selection of suppliers, and strict quality control of the production process have made the FAAC brand a global byword for high quality, reliability, compliance with standards, and end-user safety.

FAAC logo

11) Avon Barrier Corporation Ltd

Avon Barrier Corporation Ltd designs and manufactures a range of physical security solutions to protect critical infrastructure and public spaces from vehicle-borne threats. The main products include vehicle safety guardrails, roadblocks, safety bollards, sliding automatic doors, and other turnstiles.

Their specialist HVM solutions have successfully passed impact testing to PAS 68, IWA 14-1, and PAS 68. ASTM F2656 is designed to protect perimeters and access points of critical infrastructure and equipment. Public venues include airports, oil and gas, financial institutions, government buildings, data centers, military bases, stadiums, and shopping malls.

We operate globally and supply systems to more than 70 countries.

Avon Barrier logo

12) PROMStahl GmbH

PROMStahl GmbH offers loading technology and steel construction products based on its expertise gained from many years of experience. In addition to attachment technology for various models of accessories, the product offer also includes a complete range of industrial doors. With the latest production technology and high-quality workmanship, the offer of industrial doors ensures a high level of performance and economic efficiency, just like loading technology. Of course, his products also include bollards.

PROMStahl GmbH considers that quality, safety, energy performance, durability, reliability, cost-effectiveness, and sustainability form the reference criteria for all operations. Research and development, and continuous product improvement in close cooperation with customers are core competencies that are unique to PROMStahl employees. From consultation to after-sales service, technical consultants responsible for design are always present at all construction sites.

PROMStahl GmbH logo

13) Anter System Polska Sp. z o. o.

Durability, reliability, and high-quality materials have been the cornerstones of the top Polish brand Anter System for 15 years. Undoubtedly, the distinguishing feature of Anter System is the comprehensive and completely satisfactory product range. In addition to manufacturing and selling crash protection systems, they also offer services such as audits, free safety device system design, and subsequent installation. Their products are easy to install and maintenance-free, ensuring the highest level of safety, guaranteeing lower downtime and accident rates during production, and effectively reducing potential image and financial losses.

Their latest product. Available in different versions for doors and railings, door and column guards, sliding doors, floor railings, and stopper brackets.

Anter System logo

14) BollardsUSA

Founded in 1909, BollardsUSA is a U.S.-based manufacturer and distributor of steel and cast iron products serving industries across North America. The company, a division of J.R. Hoe, offers a variety of decorative bollards, including cast iron bollards, coated steel bollards, and stainless steel bollards. These bollards come in different shapes, sizes, and materials to help meet a variety of security needs. The company’s products are used to improve safety, security, and traffic control in a variety of environments, including industrial facilities, parking lots, storefront security, and pedestrian areas.

BollardsUSA logo

15) BFT S.p.A.

Bft is a global leader in access control automation, known for its “Be Ahead” philosophy. Bft has designed and developed a range of different bollard types that today offer the perfect solution. Once installed, these bollards offer the following key benefits:

  • Designed to comply with major international safety standards (IWA and PAS68);
  • High level of breakout resistance, structurally designed to stop vehicles weighing more than 7 tons and traveling at 50 mph;
  • Each automatic anti-terrorist bollard is equipped with its own hydraulic pump, allowing it to maintain independent operation even in the event of failure of other bollards.
  • In the event of a power failure, the column remains in place and can only be retracted through a special manual procedure;
  • Fixed bollards and automatic bollards are identical to ensure continuity and uniformity at the installation site.

Bft’s years of experience have allowed us to design systems with tamper-proof mechanisms that make bollards virtually inviolable. BFT has installed these devices in countries where the terrorist threat is high and, due to their ability to blend into existing urban environments, have virtually zero impact on the surrounding environment and continue to protect citizens. Bft’s experience in the bollard sector means bespoke solutions are designed to seamlessly meet each customer’s specific requirements.

BFT logo

16) Frontier Pitts Ltd.

Frontier Pitts is the UK’s leading manufacturer of security gates, automatic and manual barriers, turnstiles and pedestrian control gates, and bollards raised curbs and barriers. Frontier Pitts designs, manufactures, installs, commissions, and then maintains your perimeter security equipment for years to come.

Frontier Pitts manufactures a range of automatic rising bollards and static bollards, including the Anti-Ram Rising bollard. Their Hostile Vehicle Mitigation (HVM) bollards include rising/telescoping bollards, static, shallow static, and removable Terra bollards, which have all successfully passed IWA14 and PAS68 vehicle impact testing to stop 7.2t/7.5t vehicles Travel at a certain speed and energy.

Frontier Pitts Ltd. logo

17) EL-GO Team

EL-GO Team is a team of innovative experts dedicated to producing the highest quality and most advanced access control, hostile vehicle mitigation (HVM), counter-terrorism solutions, and products for a wide range of end markets…while delivering the best customer service. Since 1991, the EL-GO Team has been developing, manufacturing, and supplying access control and counter-terrorism vehicle barricade systems. Their products include high-security vehicle barriers: bollard systems, arm barriers, road barriers (wedge barriers), spike systems, and digital control systems. You can find their products around the world in airports, military sites, government offices, sports venues, hotels, banks, pedestrian areas, and more.

Additionally, the EL-GO Team’s safety bollards have successfully passed crash tests and are certified to the highest standards of ASTM/PAS68 and IWA-14.

EL-GO Team logo

18) CAME URBACO

CAME URBACO is a French designer and manufacturer of security and access control products, founded in 1984 in Monte and acquired in 2012 by the Italian CAME Group of Companies. The company mainly produces retractable bollards used to control parking or traffic access, turnstiles to regulate the entry and exit of people into private areas, and toll systems for border payment management operations. It also provides custom engineering and product maintenance services to customers who require additional support. The company primarily serves the transportation, public transport, and commercial sectors in France.

CAME URBACO logo

19) Wilcox Door Service Inc.

Founded in 1912 and located in Mississauga, Ontario, Wilcox Door Service Inc. is a commercial door supplier and provides maintenance and repair services. The company supplies industrial doors, loading docks, vehicle restraints, dock sealing shelters, and door operators. Products are used in the pharmaceutical, automotive, property management, manufacturing, and government industries. It offers fire door drop testing, planned maintenance programs, door and dock installations, and energy conservation programs. The company received the 2015-2020 Dealer of the Year Award from TNR Doors and the 2017-2019 Chamberlain Award for Excellence.

20) Calpipe Security Bollards

Founded in 1998 and headquartered in Rancho Dominguez, California, Calpipe Security Bollards is a global provider of bollards, bollard security, and bollard solutions. The company provides bollard solutions that power and protect high-profile and densely populated spaces around the world. Its core products include safety bollards, electrical conduits and accessories, and cable management solutions. These products are widely used in power, telecommunications, transportation, commercial and retail industries. Since its founding, the company has provided bollard solutions for high-profile, high-traffic public spaces around the world, including the Santa Monica Pier, AT&T Park, and Times Square.

Calpipe Security Bollards logo

6. Conclusion

That’s the list of the top 20 bollard manufacturers in 2023 compiled by this guide for you. If you are considering purchasing bollards, you can refer to the above information to make your choice.

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.